ECMM, DOCSIS 3.0, 1xGE, MCX/SMB/MMCX, DV110IE
Tlhaloso e Khutšoanyane:
DV110IE ea MoreLink ke Module ea DOCSIS 3.0 ECMM (Module ea Modem ea Cable e kentsoeng) e tšehetsang liteishene tse fihlang ho tse 8 tse ka tlase le tse 4 tse hokahaneng tse holimo ho fana ka boiphihlelo bo matla ba inthanete bo potlakileng.
DV110IE e thatafalitsoe mochesong bakeng sa ho kopanngoa le lihlahisoa tse ling tse hlokahalang ho sebetsa tikolohong ea kantle kapa mochesong o feteletseng.
Qaqiso ea Sehlahisoa
Li-tag tsa Sehlahisoa
Qaqiso ea Sehlahisoa
DV110IE ea MoreLink ke Module ea DOCSIS 3.0 ECMM (Module ea Modem ea Cable e kentsoeng) e tšehetsang liteishene tse fihlang ho tse 8 tse ka tlase le tse 4 tse hokahaneng tse holimo ho fana ka boiphihlelo bo matla ba inthanete bo potlakileng.
DV110IE e thatafalitsoe mochesong bakeng sa ho kopanngoa le lihlahisoa tse ling tse hlokahalang ho sebetsa tikolohong ea kantle kapa mochesong o feteletseng.
E itshetlehile hodima tshebetso ya Full Band Capture (FBC), DV110IE ha se feela Cable Modem, empa hape e ka sebediswa e le Spectrum Analyzer.
Heatsink ke ea tlamo 'me e ikhethile ka ho khetheha. Ho fanoa ka masoba a mararo a PCB ho potoloha CPU, e le hore bracket ea heatsinking kapa sesebelisoa se tšoanang se ka khomareloa ho PCB, ho fetisetsa mocheso o hlahisoang hole le CPU le ho ea matlong le tikolohong.
Tlhaloso ena ea sehlahisoa e akaretsa DOCSIS®le EuroDOCSIS®Mefuta ea 3.0 ea letoto la lihlahisoa tsa Embedded Cable Modem Module. Ka lebaka la tokomane ena, e tla bitsoa DV110IE.
Likarolo tsa Sehlahisoa
➢ Ho latela melao ea DOCSIS / EuroDOCSIS 3.0
➢ Likanale tse 8 tse hokahaneng tse theohelang tlase le tse 4 tse holimo
➢ Thempereichara e thatafalitsoe
➢ Tšehetsa ho Tšoasoa ha Sehlopha se Felletseng
➢ Sehokelo sa RF: SMB bakeng sa DS e kopaneng le US
➢ Sehokelo sa RF: MMCX bakeng sa DS e arohaneng le US
➢ Matshwao a SPI, UART, GPIO a ka fihlellwa ka Sehokelo sa Matshwao
➢ Kou e le 'ngoe ea Gigabit Ethernet e tšehetsang puisano e iketsang
➢ Mohlokomeli oa Kantle ea Ikemetseng (Ha ho hlokahale)
➢ Sensor ea mocheso ka har'a boto (Boikhethelo)
➢ Boemo bo nepahetseng ba matla a RF (+/-1dB) maemong ohle a mocheso
➢ Sehlahlobi sa Spectrum se Kenyelelitsoeng
➢ Li-DOCSIS MIB, li-SCTE HMS MIB lia tšehetsoa
➢ API ea sistimi e bulehileng le sebopeho sa data bakeng sa phihlello ea lits'ebetso tsa mokha oa boraro
➢ Ntlafatso ea software ke netweke ea HFC
➢ Boholo bo Bonyenyane ba Sephutheloana sa PCBA
DV110IE ke mojule wa mantlha o nang le kgatiso e nyane haholo ya leoto mme o kopantswe habonolo dihlahisweng tse ding tsa HFC. Bolo ya sistimi e ka tlase:
Mohlokomeli oa Kantle
Ho sebediswa mohlokomedi wa kantle ho netefatsa hore tshebetso ya sistimi e sebetsa ka botshepehi. Mohlokomedi o rahwa ke Firmware nako le nako e le hore CM e se ke ya seta botjha. Haeba ho na le ho hong ho phoso ka CM Firmware, kamora nako e itseng (nako ya mohlokomedi), CM e tla seta botjha ka boyona.
Kopo
➢ Transponder, joalo ka Phepelo ea Motlakase, Node ea Faeba, UPS, Matla a CATV
➢ Video ea Khamera ea IP
➢ Matšoao a Dijithale
➢ Sephethephethe sa Wi-Fi Hotspot
➢ Kgaso ea maemo a tšohanyetso
➢ 4G LTE le 5G Small Cell
➢ DVB-C kapa Hybrid STB e kentsoeng CM
➢ Likopo tsa Smart City
➢ Lisebelisoa le Lisebelisoa tsa CATV/QAM/DOCSIS/HFC
Tšehetsa HMS MIBs
| 1 | SCTE 36(HMS028R6) | Tlhaloso ea SCTE-ROOT le scteHmsTree |
| 2 | SCTE 37(HMS072R5) | Lihlopha tse nyenyane tsa sefate sa scteHms |
| 3 | SCTE 38-1(HMS026R12) | Lintho tsa propertyIdent |
| 4 | SCTE 38-2(HMS023R13) | lialamoLintho tse khethollang |
| 5 | SCTE 38-3(HMS024R13) | Lintho tsa commonAdminGroup le ntho ea commonPhyAddress |
| 6 | SCTE 38-4(HMS027R12) | Lintho tsa psIdent |
| 7 | SCTE 38-5(HMS025R13) | Lintho tsa fnIdent |
| 8 | SCTE 38-7(HMS050R5) | Lintho tsa transponderInterfaceBusIdent |
| 9 | SCTE 38-10(HMS115) | Lintho tsa MIB tsa Amplifier ea RF |
| 10 | SCTE 25-1 | Tlhokomelo ea Boemo ba Kantle ba Semela sa Hybrid Fiber Coax |
Sesepa sa Spectrum: Likarolo tsa Bohlokoa
- Sebaka sa maqhubu a ho skena (5 - 1002 MHz)
- tlhophiso ea RBW
- Letshwao (Ha le notletswe, Boemo ba Matla/ QAM/ kamora BER / pele ho BER/ Sekgahla sa Letshwao)
- Sehlopha sa linaleli
- Tlhōrō/ Karolelano
- Tlhokomeliso
- Yuniti (dBm/ dBmV/ dBuV)
- Boemo ba lerata <-50 dBmV bakeng sa DS
- Boemo ba lerata <-20 dBmV bakeng sa US
Li-parameter tsa Tekheniki
| Tšehetso ea Protokhole | ||
| DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP v1/v2/v3 TR069 | ||
| Khokahano | ||
| RF | Sehokelo sa SMB sa x1 bakeng sa D/S le U/S tse kopaneng (J1405) Lihokelo tsa MMCX tsa x2 bakeng sa D/S e arohaneng (J1415) le U/S (J1416) | |
| RJ45 | Kou ea Ethernet ea 1x RJ45 10/100/1000 Mbps (J401) | |
| Sebopeho sa Matshwao | Hlooho ea Pin, 2x10, 2.0mm, Sekhutlo se Letona (Khetho) (J1410) Sehlooho sa Lebokose, 2x10, 2.0mm, Angle e Otlolohileng (Khetho) (J1413) Hlooho ea Pin, 2x10, 2.0mm, Sekhutlo se Otlolohileng, Setona (J1414) Litlhaloso tsa Pin sheba Tafole #1 | |
| RF Tlase ho Molapo | ||
| Maqhubu (ho tloha pheletsong ho ea pheletsong) | 88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS) | |
| Bandwidth ea Channel | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Ho lemoha ka boiketsetso, Mokhoa oa Hybrid) | |
| Ho feto-fetoha ha molumo | 64QAM, 256QAM | |
| Sekhahla sa Lintlha | Ho fihlela ho 400Mbps ka khokahano ea 8 Channel | |
| Boemo ba Letšoao | Litokomane: -15 ho isa ho +15dBmV Litokomane tsa Euro: -17 ho isa ho +13dBmV (64QAM); -13 ho isa ho +17dBmV (256QAM) | |
| RF e eang holimo
| ||
| Sekhahla sa Maqhubu | 5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Boikhethelo) | |
| Ho feto-fetoha ha molumo | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM | |
| Sekhahla sa Lintlha | Ho fihlela ho 108Mbps ka 4 Channel Bonding | |
| Boemo ba Tlhahiso ea RF | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV | |
| Marang-rang | ||
| Protokhole ea marang-rang | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 le L3) | |
| Tsela | DNS / seva sa DHCP / RIP I le II | |
| Ho Abelana Inthanete | Seva sa NAT / NAPT / DHCP / DNS | |
| Phetolelo ea SNMP | SNMP v1/v2/v3 | |
| Seva ea DHCP | Seva ea DHCP e hahiloeng kahare ho aba aterese ea IP ho CPE ka koung ea Ethernet ea CM | |
| Moreki oa DCHP | CM e fumana aterese ea seva ea IP le DNS ka bo eona ho tsoa ho seva ea MSO DHCP | |
| Mekaniki | ||
| LED ea Boemo | x6 (PWR, DS, US, Inthaneteng, LAN, Maemo a RF) | |
| Konopo ea ho Seta Bocha ba Feme | x1 (SW401) | |
| Litekanyo | 65mm (Bophara) x 110mm (Bophara) x 17mm (Bophara) | |
| Envtšepe | ||
| Kenyelletso ea Matla | Jack ea DC (6.4mm/2.0mm) (CN6) Hlooho ea Wafer, 1x 2, 2.0mm, Sekhutlo se Letona. (Khetho) (CN5) Tšehetsa ho kenya matla ka bophara: +5VDC ~ +24VDC | |
| Tšebeliso ea Matla | 12W (Boholo) 7W (MOFUTA OA TŠOANANO) | |
| Mocheso o sebetsang | Khoebo: 0 ~ +70 oC Indasteri: -40 ~ +85 oC | |
| Mongobo o sebetsang | 10~90% (Ha e kobehe) | |
| Mocheso oa Polokelo | -40 ~ +85oC | |
Sebopeho sa Letšoao: Tlhaloso ea Pin (J1410, J1413, J1414)
| Pin ea Kou | Tlhaloso ea Letšoao | Mofuta oa Letšoao | Boemo ba Letšoao |
| 1 | SPI MOSI | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 2 | OACHE EA SPI | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 3 | SPI MISO | Keno ea Dijithale | 0 ho isa ho 3.3VDC |
| 4 | LED ea DS (e bonesitsoe ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 5 | Fatše | Referense | 0V |
| 6 | LED ea INTHANETENG (e bonesitsoe ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 7 | LED ea US (e bonesitsoe ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 8 | LED ea PWR (e bonesitsoe ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 9 | SPI Chip Khetho ea 1 | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 10 | SPI Chip Select 2 | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 11 | GPIO_01 | Tšebeliso ea nakong e tlang | 0 ho isa ho 3.3VDC |
| 12 | Fatše | Referense | 0V |
| 13 | Fatše | Referense | 0V |
| 14 | E nolofalletsa ho fetisetsa koung ea serial | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 15 | Seta botjha (E sebetsa e tlase) | Keno ea Dijithale | 0 ho "Bula" kapa 3.3VDC |
| 16 | LEBAKA LA RF LED e tala (e bonesitsoe ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 17 | GPIO_02 | Tšebeliso ea nakong e tlang | 0 ho isa ho 3.3VDC |
| 18 | LEBAKA LA RF LED e khubelu (e bonesitsoeng ha e le tlase) | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 19 | Phetiso ea UART | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
| 20 | UART Amohela | Tlhahiso ea Dijithale | 0 ho isa ho 3.3VDC |
J1410: PhiniSehlooho, 2x10, 2.0mm, Sekhutlo se Letona.
J1413: LebokoseSehlooho, 2x10, 2.0mm, Sekhutlo se Otlolohileng.
J1414: Hlooho ea Pin, 2x10, 2.0mm, Sekhutlo se Otlolohileng.
J401: RJ45, ntle le Transformer, ka mabone a LED a mabeli, a nang le tšireletso, Angle e nepahetseng
J1417: Hlooho ea Wafer, 1x8, 2.0mm, Sekhutlo se Letona.
SW401: Konopo ea ho Seta Bocha, SMD, Sekhutlo se Letona.
J1405: SMB, 75 OHM, DIP, Sekhutlo se Letona. Letshwao la D/S le U/S RF le kopantsweng.
J1415, J1416: MMCX, 50 OHM, DIP, Angle e ka ho le letona. Letshwao la D/S le U/S RF le arohaneng.
CN5:Sehlooho sa Wafer, 1x2, 2.0mm, Sekhutlo se Letona. Tlatsa ka lehlakoreng le ka tlase la PCB.
Pin1 - VIN
Pin2 – GND
CN6: DC JACK, OD=6.4mm/ID=2.0mm. Polaka ea DC e Tšoanang OD=5.5mm/ID=2.1mm
Litekanyo tsa Heatsink (Yuniti: mm)
Litekanyo tsa PCBA (Yuniti: mm)
